Contact us to find out more about our SIMPLE approach to building energy modeling
BUILDING ENVELOPE ECMs
We use OpenStudio / EnergyPlus, an 8760 hourly energy simulation engine developed by U.S. Department of Energy for our simple and
detailed energy modeling. The software takes into account your building's unique construction, orientation, internal loads,
hours of operation, mechanical and electrical systems, local weather data, and many other variables to give you the estimated energy
savings that best reflect your building.
We can assist you with the following:
- ECM Evaluation
- Utility Incentive Calculations & Energy Modeling
- ASHRAE Energy Audits (Levels 1, 2, & 3)
- ASHRAE 90.1 Baseline
Comparison
- Measurement & Verification Support
- Local Law 97 (NYC)
- Building Benchmarking
- Sustainability Project Support
- Evaluate
Innovative Energy Solutions
- Identify Impactful ECMs specific to your building
- Design Options Evaluation & Optimization
- Review
Energy Reports & Proposals
- Create Energy Savings Excel Spreadsheets
- and others tasks and energy savings work.
- Roof R-Value
- Wall R-Value
- Infiltration
- Windows Upgrade
- Window Solar Film
- Heat Recovery Ventilator
- Air-Side Economizer
- Demand Controlled Ventilation
- Air-Source Heat Pump
- VRF System
- High-Efficiency Chiller
- High-Efficiency Boiler
- Space Temperature Setpoints
- Advanced BMS Controls
- Ventilation Adjustments
- Programmable Thermostat
- Waste Heat
Recovery
- And Others...
- Solar PV
- Gas to Electric Heating
- Oil to Electric Heating
- Building Orientation
- Exterior Shading
WHAT WE DO
New customers get 10% off with code BEM26.
